2025 HANGCHA 3-Wheel XC series Li-ion 2500-4000lbs CPDS15-XCC2G-SI

Information

2025 HANGCHA 3-Wheel XC series Li-ion 2500-4000lbs CPDS13-XCC2G -SI

Covering models with a tonnage of 1.3t, 1.5t, 1.6t, 1.8t and 2.0t respectively, the new XC series three-point new energy electric forklifts are HANGCHA’s dedicated-purpose battery forklifts subsequent to the XC series four-point dedicated-purpose battery forklifts.

Equipped with the dedicated lithium battery cells and modules for the XC series forklifts, which are developed jointly by HANGCHA and CATL, the truck has the features of high lifting speed, high driving speed, excellent ergonomic design, easy operation and high safety.

Features may include:

Excellent ergonomic design
  • The truck has a large operation space more than 50% larger than that of the traditional three-point electric truck.
  • The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue
Easy operations and maintenance
  • With the fully sealed hood and side plates, all major components including the electrically controlled components, motor, electrical components, etc. are sealed from dust and water
  • Vulnerable parts and key parts are arranged reasonably to facilitate maintenance and repair
Advancement
  • The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
  • The ultra-high power AC drive motor has a bridge structure
Comfort
  • Owing to the low center of gravity and good stability, the driver feels comfortable during turning
  • Silence, no pollution, energy saving and other advantages meet environmental protection requirements

Photos

Highlights

  • Flesherton, Ontario
  • 2025
  • HANGCHA
  • 3-Wheel XC series Li-ion 2500-4000lbs CPDS15-XCC2G-SI
  • Electric
  • Available
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3158 mm | Aisle for pallets 800 x 1200 lengthways: 3280 mm
  • mast lowered: 1978 mm | mast extended: 3945 mm | of overhead guard STD: 2100 mm | Seat/stand : 1000 mm | Coupling: 520 mm

Specifications

  • 2025
  • HANGCHA
  • 3-Wheel XC series Li-ion 2500-4000lbs
  • CPDS15-XCC2G-SI
  • Electric Stand Up End Control (Docker)
  • Drive rating S2 60 min: 5x2 AC KW | Lift motor rating at S3 15%: 15 AC KW
  • Electric
  • MOSFET/AC | Curtis
  • Service: Hydraulic
  • Mechanical
  • 18x7 - 8 solid | Tread: 914 mm
  • 15x4.5 - 8 solid | Tread: 178 mm
  • number front rear: 2x/2
  • 80/228 V/Ah
  • Travel, laden/unladen: 16/16 km/h | Lift, laden/unladen: 450/600 mm/s | Lowering, laden/unladen: 460/440mm/s | Acceleration time, laden/unladen (0-10m): 4.6/4.2 s
  • Drawbar pull, laden/unladen: 3400 /3950 N | Max. Drawbar pull, laden/unladen: 12000/12000
  • Sound level at the driver´s ear according to EN / DIN 12 053: 72 dB (A)
  • for attachments: 150 bar
  • Oil: 35 l/min
  • Load centre distance: 500 mm | oad distance, centre of drive axle to fork: 360 mm | Tilt of mast/fork carriage forward/backward: 7/6 Grad | Free lift: 145 mm | Lift: 3000 mm | Fork dimensions: 35/100/920 mm | Distance between fork-arms: 200/1000 mm | Gradeability, laden/unladen: 16/18% | Max. gradeability, laden/unladen: 20/20 %
  • 1277 mm
  • mast lowered: 1978 mm | mast extended: 3945 mm | of overhead guard STD: 2100 mm | Seat/stand : 1000 mm | Coupling: 520 mm
  • 2754 mm
  • to face of forks: 1834 mm
  • 1080 mm
  • Fork-carriage: 1000 mm | Aisle for pallets 1000 x 1200 crossways: 3158 mm | Aisle for pallets 800 x 1200 lengthways: 3280 mm
  • laden, below mast: 100 mm | centre of wheelbase: 110 mm
  • 1470 mm
  • Rated: 1500 kg
  • loading, laden: 3765 kg | loading, unladen: 1260 kg
  • loading, laden: 505 kg | loading, unladen: 1510 kg
  • Tank drain & refill: 33 liter
  • Service: 2770 kg | Min. battery: 195 kg | Max. battery: 230 kg
  • Operator type: seated | Towing coupling, type DIN: 24 Pin