O'Donnell Enterprises

  • 400503 Grey Road 4
  • Flesherton, ON N0C 1E0
  • Call Us: (519) 599-5238
  • https://www.odonnell-lift.ca/
Print This Page

2025 HANGCHA X series 4 Wheel Pneumatic 12,000-22,000lbs CPD70-XC4

Information

2025 HANGCHA X series 4 Wheel Pneumatic 12,000-22,000lbs CPD100-XC4

The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.

The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.

Features may include:

Exterior
  • A new exterior design method is used to form a stylish and elegant exterior with streamlined curved surfaces and smooth ethereal lines.
Stability
  • Small-diameter solid tires, front and rear battery sets and other technologies are used to enable excellent stability of the vehicle.
Comfort
  • The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.
Safety
  • The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Maintainability
  • The fully open front and rear battery lids easily facilitate battery maintenance.
Advancement
  • The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc. and high safety and reliability
High speed, high efficiency
  • With several speed gears, the vehicle is adapted to different operating environments.

Photos

Highlights

  • Flesherton, Ontario
  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatic 12,000-22,000lbs CPD70-XC4
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Available
  • Fork-Carriage: 1700 mm | Aisle for pallets 1000 x 1220 crossways: 4853.5 mm | Aisle for pallets 1200 x 1000 Lengthways: 5053.5 mm
  • Mast Lowered: 2500 mm | Mast Extended: 4407 mm | Of Overhead Guard (Cabin): 2565 mm | Seat /stand: 1430 mm | Coupling: 423 mm

Specifications

  • 2025
  • HANGCHA
  • X series 4 Wheel Pneumatic 12,000-22,000lbs
  • CPD70-XC4
  • Pneumatic
  • HANGCHA GROUP CO.,LTD. | CURTIS | Type Designation: CPD70-XC4
  • Drive rating S2 60 min: 35 kw | Lift rating at S3 15%: 40 kw
  • Drive (battery or mains), diesel, petrol, fuel gas: Electric
  • Type unit: MOSFET/AC
  • Service: Hydraulic
  • Mechanical
  • 355/65-15
  • 250-15
  • 2x/2
  • Acc. to DIN 43531/35/36 A,B,C, no: no
  • voltage, K5: 96 V / 810 Ah
  • Travel, laden/unladen: 15/15.5 km/h | Lift, laden/unladen: 0.32/0.39 m/s | Lowering, laden/unladen: 0.5/0.34 m/s
  • Max. Drawbar pull, laden/unladen: 36000 N
  • Operating pressure for attachments: 190 bar
  • Load centre distance: 600 mm | Load distance, centre of drive axle to fork: 603.5 mm | Tread, Front: 1574 mm | Tread, Rear: 1536.5 mm | Tilt of mast/fork carriage forward/backward: 5/10° | Free lift: 160 mm | Lift: 3000 mm | Fork: 60/150/1200 mm | Distance Between Fork-Arms: 300-1700 mm | Max. Gradeability, laden/unladen: 15 % | Battery: 1420×610×570 mm | Towing coupling, type DIN 15170: 40 Pin
  • 2030 mm
  • Mast Lowered: 2500 mm | Mast Extended: 4407 mm | Of Overhead Guard (Cabin): 2565 mm | Seat /stand: 1430 mm | Coupling: 423 mm
  • 4400 mm
  • To Face Of Forks: 3200 mm
  • 1870 mm
  • Fork-Carriage: 1700 mm | Aisle for pallets 1000 x 1220 crossways: 4853.5 mm | Aisle for pallets 1200 x 1000 Lengthways: 5053.5 mm
  • Laden, Below Mast: 200 mm | Centre Of Wheelbase: 183 mm
  • 3050 mm
  • Rated: 7000 kg
  • Loading Laden: 15180/2100 kg | Loading Unladen: 3950/6300 kg
  • Loading Laden: 15180/2100 kg | Loading Unladen: 3950/6300 kg
  • Oil for attachments: 120 l/min
  • Tank (drain & refill): 98 liter
  • Service: 10280 kg | battery: 2510 kg | Min. battery: 2510 kg | Max. battery: 3500 kg
  • Operator type: Seated | Tyres (solid rubber, superelastic, pneumatic, polyurethane): SE