2021 HANGCHA Heavy Duty Walkie Pallet Jack WP20

Information

2021 HANGCHA Heavy Duty Walkie Pallet Jack WP20

A series walking pallet truck is newly developed logistics handling equipment developed by Hangcha for the North American market. The AC drive control technology provides advanced performance, comfortable operation, safe and reliable, low maintenance costs. It can be use for loading and unloading in warehouses, supermarkets and workshops.

Features may include:

  • 24 volt electrical system
  • CAN BUS communication
  • Curtis AC Controller
  • 7.8” Battery Compartment
  • PU drive tire
  • Maintenance-Free battery 150Ah
  • Built-in charger
  • SB-175 battery connector (red)
  • Battery disconnect handle
  • Key switch
  • Multi-function meter
  • Electric horn
  • Upright-tiller creep speed running
  • PU load wheel
  • Single load wheel
  • Balance leg

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Heavy Duty Walkie Pallet Jack WP20
  • Drive: electric (battery or mains), diesel, petrol, fuel gas
  • Available
  • Fork-Carriage: 39.4 in | Aisle For Pallets 39” x 47” Crossways: 127.4 in | Aisle For Pallets 31.5” x 47.2” Lengthways: 132.3 in
  • Lowered: 3.1 in | Mast Extended: 155.3 in | Of Overhead Guard STD: 80.3 in | Seat: 39.4 in | Coupling: 19.7 in

Specifications

  • 2021
  • HANGCHA
  • Heavy Duty Walkie Pallet Jack
  • WP20
  • Manual
  • CBD20-AMC1
  • Drive motor rating S2 60 min: 2 HP (1.5 kw) | Lift motor rating at S3 15%: 3 HP (125 kw)
  • Drive: electric (battery or mains), diesel, petrol, fuel gas
  • INMOTION
  • Service: Hydraulic
  • Mechanical
  • 09×3/0230×75
  • 3.50-5
  • 2x/2
  • voltage, Std: 24 V /125 Ah
  • Travel speed, laden/unladen: 5.6/6.2 mph (9/10 km/h) | Lift speed, laden/unladen: 41.3/63 fpm (210/320 mm/s) | Lowering speed, laden/unladen: 80.7 fpm (410 mm/s)
  • Max. Drawbar pull, laden/unladen: 765/810 lbf (3400/3600 N)
  • Sound pressure level at the driver’s seat3: 69 dB (A)
  • Operating pressure for attachments: 150 bar
  • Load centre distance: 24 in | Load distance, centre of drive axle to fork: 37.8 in | Tread, Front: 17 in | Tread, Rear: 15.7 in (350 mm) | Tilt of mast/fork carriage forward/backward: 5/10° | Free lift: 5.7 in | Lift: 4.7 in | Fork: 1.4/3.9/36.22 in | Distance Between Fork-Arms: 7.9/39.3 in | Max. Gradeability, laden/unladen: 12/13 % | Towing coupling, type DIN: 24 Pin
  • 16.5”: 57.79 in (1469 mm) | 18.5”: 59.79 in (1519 mm)
  • Lowered: 3.1 in | Mast Extended: 155.3 in | Of Overhead Guard STD: 80.3 in | Seat: 39.4 in | Coupling: 19.7 in
  • 110.9 in
  • 42.8 in
  • Laden, Below Mast: 3.9 in | Centre Of Wheelbase: 4.3 in
  • Fork-Carriage: 39.4 in | Aisle For Pallets 39” x 47” Crossways: 127.4 in | Aisle For Pallets 31.5” x 47.2” Lengthways: 132.3 in
  • To Face Of Forks: 16.5”: 57 in (1450 mm) | To Face Of Forks: 18.5”: 59.79 in (1519 mm)
  • 61.2 | Internal: 26.8 in
  • Rated: 4000 lb
  • Loading Laden: 9047/1368 lb | Loading Unladen: 3177/3707 lb
  • Loading Laden: 9047/1368 lb | Loading Unladen: 3177/3707 lb
  • Oil volume for attachments: 35 l/min
  • Tank - capacity (drain & refill): 6.87 gal
  • Service: 2885 lb (1310 kg) | Battery. 110 lb (50 kg)
  • Operator type: hand, pedestrian, standing, seated, order-picker | Tires: solid rubber, superelastic, pneumatic, polyurethane