2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

Information

2021 HANGCHA Cushion Tire IC Forklift 3,000-6,500lbs FP32C

XF series LPG cushion tire forklift is developed on basis of existing XF series by Hangcha, with world-leading technologies, a world-class forklift that can meet your demand in all dimensions thanks to the overall upgrading in appearance modeling, energy conservation and environmental protection, comfort, safety, and reliability. Application of new technologies including load-sensing hydraulic system, energy-eficient lighting system, low-emission engine, effective noise and vibration control, and brand-new control system offers higher eficiency and lower cost for your work.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs FP32C
  • 12 V | Vehicle electrical system voltage: 12 V
  • Hangcha Powershift
  • LPG
  • Available
  • Backrest: 45.5 in (1156 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 146.1 in (3710 mm) | Aisle width for pallets 800 x 1200 lengthways: 153.9 in(3910 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 163.2 in (4145 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)

Specifications

  • 2021
  • HANGCHA
  • Cushion Tire IC Forklift 3,000-6,500lbs
  • FP32C
  • Cushion Tire
  • CPYD32-XW71F-C / GCT GK25 LPG CERT
  • 61.4 hp (45.8 kW)
  • LPG
  • 2700 r/min
  • 4
  • 2488 cm3
  • 187/1600 N·m/r/min
  • Hangcha Powershift
  • FWD/RVS: 1/1
  • Cushion 2×/2
  • 21×8×15
  • 16×6×10.5
  • Service: Hydraulic
  • Mechnical
  • 12 V | Vehicle electrical system voltage: 12 V
  • voltage/nominal capacity: 12 V/60Ah
  • Travel, Laden/unladen: 10.9/11.5 mph (17.5/18.5 km/h) | Lift, laden/unladen: 98.4/104.3 ft/min (0.50/0.53 m/s) | Lowering, laden/unladen: 88.6/98.4 ft/min (0.45/0.50 m/s)
  • Drawbar pull, laden/unladen: 23000/9000 N
  • 2538 psi (17.5 MPa)
  • Load centre distance: 24 in (600 mm) | Load distance, centre of drive axle to fork: 17.7 in (450 mm) | Tread, front: 36.2 in (920 mm) | Tread, rear: 36.2 in (920 mm) | Tilt of mast/fork carriage forward/backward: 6/8 ° | Free Lift: 5.3 in (135 mm) | Lift: 118.1 in (3000 mm) | Fork dimensions: 1.8×4.8×42 in (45×122×1070 mm) | Distance between fork-arms: 9.9-42.6 in (252-1082 mm) | Minimum plvoting distance: 21.2 in (539 mm) | Gradeability, laden/unladen: 30/20 %
  • 57.1 in (1450 mm)
  • mast lowered: 77.6 in (1970 mm) | mast extended: 163.2 in (4145 mm) | of overhead guard: 83.3 in (2115 mm) | Seat height relating to SIP: 40.2 in (1020 mm) | Cupling: 10.2 in (260 mm)
  • 138 in (3505 mm)
  • to face of forks: 96.7 in (2460 mm)
  • (without backrest): 139 in (3530 mm)
  • Backrest: 45.5 in (1156 mm) | Fork-carriage: 43.3 in (1100 mm) | Aisle width for pallets 1000 x 1200 crossways: 146.1 in (3710 mm) | Aisle width for pallets 800 x 1200 lengthways: 153.9 in(3910 mm)
  • Laden, below mast: 3.5 in (90 mm) | centre of wheelbase: 5.1 in (130 mm)
  • 81.1 in(2060 mm)
  • 6500 lb (2950 kg)
  • Loading, laden: 14220 lb (6450 kg) | Loading, unladen: 3200 lb (1450 kg)
  • Loading, laden: 2180 lb (990 kg) | Loading, unladen: 6700 lb (3040 kg)
  • 11 gal (42 liter)
  • 9900 lb (4490 kg)
  • Operator type: Seated