2025 HANGCHA Core Pneumatic Forklift 3,000-7,000lbs CPCD10-XW32F/B

Information

2025 HANGCHA Core Pneumatic Forklift 3,000-7,000lbs CPCD10-XW32F/B

In the XF Series, Hangcha brought together the experience of more than 30 years building forklifts and the lastest forklift technologies, the result is superior in eciency, environmental friendliness, comfortable operation, reliability, safety. The XF Series, produced from careful research and development, represent a true solution to needs from environment, operator and owner.

Photos

Highlights

  • Flesherton, Ontario
  • 2025
  • HANGCHA
  • Core Pneumatic Forklift 3,000-7,000lbs CPCD10-XW32F/B
  • 12 V
  • HANGCHA/OKAMURA | Powershift
  • Diesel
  • Available
  • Backrest: 43 in (1094 mm) | Fork-carriage: 1000 mm | Min. right angle stacking aisle: 2370 mm | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • mast lowered: 1995 mm | mast extended: 3955 mm | of overhead guard: 2125 mm (2205 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)

Specifications

  • 2025
  • HANGCHA
  • Core Pneumatic Forklift 3,000-7,000lbs
  • CPCD10-XW32F/B
  • Pneumatic
  • CPCD10-XW32F/B | YANMAR/4TNE92
  • 32.8 kw
  • Diesel
  • 2450 r/min
  • 4
  • 2659 cm3
  • 142/1600 N·m/r/min
  • EU StageIIIA/EPA Tier3
  • 92x100 mm
  • HANGCHA/OKAMURA | Powershift
  • FWD/RVS 1/1
  • Solid 2×/2
  • 6.50-10-10PR
  • 5.00-8-10PR
  • Hydraulic
  • Mechnical
  • 12 V
  • 12 V
  • 12/60 V/Ah
  • Travel speed, laden/unladen: 18/19 km/h | Lift speed, laden/unladen: 0.58/0.60 m/s | Lowering speed, laden/unladen: 0.45/0.50 m/s
  • Drawbar pull, laden/unladen: 14600/10000 N
  • 145 bar
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 405 mm | Rear Overhang: 375 mm | Tread, front: 900 mm | Tread, rear: 920 mm | Tilt of mast/fork carriage forward/backward: 6/12 ° | Free lift: 155 mm | Lift: 3000 mm | Fork dimensions: 35x100x920 in | Distance between fork-arms: 200-1000 mm | Minimum plvoting distance: 23.4 in (595 mm) | Gradeability, laden/unladen: 31/25 %
  • 1475 mm
  • mast lowered: 1995 mm | mast extended: 3955 mm | of overhead guard: 2125 mm (2205 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)
  • 135.3 in (3437 mm)
  • to face of forks: 2255 mm
  • 1080 mm
  • Backrest: 43 in (1094 mm) | Fork-carriage: 1000 mm | Min. right angle stacking aisle: 2370 mm | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • Laden, below mast: 115 mm | Centre of wheelbase: 140 mm
  • 1965 mm
  • 1000 Kg
  • loading, laden: 3055 kg | loading, unladen: 1260 kg
  • loading, laden: 455 kg | loading, unladen: 1250 kg
  • 50 liter
  • Service: 2510 kg
  • Operator type: Seated