2025 HANGCHA Core Pneumatic Forklift 3,000-7,000lbs CPCD25-XH7F/B1

Information

2025 HANGCHA Core Pneumatic Forklift 3,000-7,000lbs CPCD25-XH7F/B1

In the XF Series, Hangcha brought together the experience of more than 30 years building forklifts and the lastest forklift technologies, the result is superior in eciency, environmental friendliness, comfortable operation, reliability, safety. The XF Series, produced from careful research and development, represent a true solution to needs from environment, operator and owner.

Photos

Highlights

  • Flesherton, Ontario
  • 2025
  • HANGCHA
  • Core Pneumatic Forklift 3,000-7,000lbs CPCD25-XH7F/B1
  • 12 V
  • HANGCHA/OKAMURA | Powershift
  • Diesel
  • Available
  • Backrest: 43 in (1094 mm) | Fork-carriage: 1038 mm | Min. right angle stacking aisle: 2710 mm | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • mast lowered: 2035 mm | mast extended: 4045 mm | of overhead guard: 2135 mm (2215 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)

Specifications

  • 2025
  • HANGCHA
  • Core Pneumatic Forklift 3,000-7,000lbs
  • CPCD25-XH7F/B1
  • Pneumatic
  • CPCD25-XH7F/B1 | XINCHAI 3E22YG51
  • 44.8 kw
  • Diesel
  • 2400 r/min
  • 3
  • 2227 cm3
  • 210/1600-1800 N·m/r/min
  • EU StageV
  • 94x107 mm
  • HANGCHA/OKAMURA | Powershift
  • FWD/RVS 1/1
  • Solid 2×/2
  • 7.00-12-12PR
  • 6.00-9-10PR
  • Hydraulic
  • Mechnical
  • 12 V
  • 12 V
  • 12/90 V/Ah
  • Travel speed, laden/unladen: 18/19 km/h | Lift speed, laden/unladen: 0.60/0.62 m/s | Lowering speed, laden/unladen: 0.45/0.50 m/s
  • Drawbar pull, laden/unladen: 19500/12500 N
  • 175 bar
  • Load centre distance: 500 mm | Load distance, centre of drive axle to fork: 465 mm | Rear Overhang: 490 mm | Tread, front: 965 mm | Tread, rear: 973 mm | Tilt of mast/fork carriage forward/backward: 6/12 ° | Free lift: 140 mm | Lift: 3000 mm | Fork dimensions: 40x122x1070 in | Distance between fork-arms: 244-1038 mm | Minimum plvoting distance: 23.4 in (595 mm) | Gradeability, laden/unladen: 24/25 %
  • 1650 mm
  • mast lowered: 2035 mm | mast extended: 4045 mm | of overhead guard: 2135 mm (2215 mm) | Seat height relating to SIP: 41.7 in (1060 mm) | Coupling: 11.8 in (300 mm)
  • 135.3 in (3437 mm)
  • to face of forks: 2605 mm
  • 1155 mm
  • Backrest: 43 in (1094 mm) | Fork-carriage: 1038 mm | Min. right angle stacking aisle: 2710 mm | Aisle width for pallets 39.4" x 47.3" crossways: 142.4 in (3617 mm) | Aisle width for pallets 31.5" x 47.3" lengthways: 150.3 in (3817 mm)
  • Laden, below mast: 115 mm | Centre of wheelbase: 150 mm
  • 2245 mm
  • 2500 Kg
  • loading, laden: 5475 kg | loading, unladen: 1560 kg
  • loading, laden: 790 kg | loading, unladen: 2205 kg
  • 60 liter
  • Service: 3765 kg
  • Operator type: Seated