2021 HANGCHA Heavy IC Forklift Truck 30,000-40,000lbs CPCD140-H9G

Information

2021 HANGCHA Heavy IC Forklift Truck 30,000-40,000lbs CPCD140-H9G

The main hydraulic components like the control valves, variable pump are products of Rexroth. ZF micro controller with 3 stage power-shift is to make sure the high reliability. German Kessler heavy load drive axle, with two stage speed adjust, muti-disc wet service brake system , is fully enclosed system with maintenance free.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 30,000-40,000lbs CPCD140-H9G
  • GERMAN Electric Control Powershift
  • Diesel
  • Available
  • mast lowered: 3500 mm | mast extended: 5150 mm | of overhead guard: 3240 mm

Specifications

  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 30,000-40,000lbs
  • CPCD140-H9G
  • General
  • CPCD140-H9G / CUMMINS/B6.7
  • StageV/Tier4/GBIV
  • 149 kW
  • Diesel
  • 2200 min
  • 6
  • 6700 cm3
  • 990/1300 N.m/r/min
  • 107 mm
  • 124 mm
  • GERMAN Electric Control Powershift
  • FWD/RVS 3/3
  • Pneumatic 4x/2
  • 12.00-24-20PR
  • 12.00-24-20PR
  • Wet Disc Brake System
  • Spring Applied, Hydraulic release multidisc brake
  • 2x12/120 V/Ah
  • Travel speed, laden/unladen: 22.5/26 km/h | Lift speed, laden/unladen: 0.30/0.33 m/s
  • Drawbar pull, laden/unladen: 125000 N
  • 210 bar
  • Load centre distance: 900 mm | Load distance, centre of drive axle to fork: 900 mm | Tread, front: 2013 mm | Tread, rear: 2200 mm | Tilt of mast/fork carriage forward/backward: 6/12° | Lift: 3300 mm | Fork dimensions ISO 2331: 1820x200x105 mm | Distance between fork-arms: 820/2400 mm | Gradeability, laden/unladen: 30%
  • 3650 mm
  • mast lowered: 3500 mm | mast extended: 5150 mm | of overhead guard: 3240 mm
  • 7268 mm
  • to face of forks: 5448 mm
  • 2706 mm
  • laden, below mast: 250mm | centre of wheelbase: 320mm
  • 4980 mm
  • 14000 kg
  • 23100 kg
  • Operator type: Seated