2021 HANGCHA Heavy IC Forklift Truck 44,000-55,000lbs CPCD250-W36

Information

2021 HANGCHA Heavy IC Forklift Truck 44,000-55,000lbs CPCD250-W36

Cummins QSC8.3 supercharged engine,Emissions comply with EPA 3 and EU III requirements; High performance, low energy consumption, low speed with high torque,great power reserves. And the engine is equipped with big dimension radiator and suction fan, it reduce the temperature of inlet air and ensure the reliability of cooling system. Using the special peripheral accessories recommended by Cummins,ensure the normal use and maintenance of the engine.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 44,000-55,000lbs CPCD250-W36
  • Diesel
  • Available
  • mast lowered: 4000 mm | mast extended: 6000 mm | of cabin: 3380 mm

Specifications

  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 44,000-55,000lbs
  • CPCD250-W36
  • General
  • CPCD250-W36 / CUMMINS/QSC8.3
  • StageIIIA/Tier3
  • 179 kw
  • Diesel
  • 2200 min
  • 6
  • 8300 cm3
  • 1085/1500 N.m/r/min
  • 114 mm
  • 135 mm
  • 4x/2
  • 14.00-24-28PR
  • 14.00-24-28PR
  • Wet disc brake system(WDB)
  • Spring Applied,Hydraulic release multidisc brake(SAHR)
  • 2x12/150 V/Ah
  • Travel speed, laden/unladen: 25/28 km/h | Lift speed, laden/unladen: 0.3/0.33 m/s
  • Drawbar pull, laden/unladen: 160000 N
  • Load centre distance: 1200 mm | Load distance, centre of drive axle to fork: 1100 mm | Tread, front: 2200 mm | Tread, rear: 2300 mm | Tilt of mast/fork carriage forward/backward: 6/10 ° | Free lift: 110 mm | Lift: 4000 mm | Fork dimensions: 2440x250x110 mm | Distance between fork-arms: 900/2600 mm | Gradeability, laden/unladen: 25%
  • 4400 mm
  • mast lowered: 4000 mm | mast extended: 6000 mm | of cabin: 3380 mm
  • 8810 mm
  • to face of forks: 6370 mm
  • 3050 mm
  • laden, below mast: 300 mm | centre of wheelbase: 450 mm
  • 6000 mm
  • 25000 kg
  • 35500 kg
  • Operator type: Seated