2021 HANGCHA Heavy IC Forklift Truck 60,000-70,000lbs CPCD300-W36

Information

2021 HANGCHA Heavy IC Forklift Truck 60,000-70,000lbs CPCD300-W36

Cummins QSC8.3 supercharged engine, Emissions comply with EPA 3 and EU III requirements; High performance, low energy consumption, low speed with high torque, great power reserves. And the engine is equipped with big dimension radiator and suction fan, it reduce the temperature of inlet air and ensure the reliability of cooling system. Using the special peripheral accessories recommended by Cummins, ensure the normal use and maintenance of the engine.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 60,000-70,000lbs CPCD300-W36
  • Diesel
  • Available
  • Min.right angle aisle: 7761 mm
  • mast lowered: 4200 mm | mast extended: 6200 mm | of cabin: 3550 mm

Specifications

  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 60,000-70,000lbs
  • CPCD300-W36
  • General
  • CPCD280-W50 / CUMMINS/QSC8.3
  • StageIIIA/Tier3
  • 179 kw
  • Diesel
  • 2200 min
  • 6
  • 8300 cm3
  • 1085/1500 N.m/r/min
  • 114 mm
  • 135 mm
  • 4x/2
  • 16.00-25-32PR
  • 16.00-25-32PR
  • Wet disc brake system
  • Spring Applied,Hydraulic release multidisc brake
  • 2×12/150 V/Ah
  • Travel speed, laden/unladen: 22/25 km/h | Lift speed, laden/unladen: 0.26/0.29 m/s
  • Drawbar pull, laden/unladen: 220000 N
  • Load centre distance: 1200 mm | Load distance, centre of drive axle to fork: 1160 mm | Tread, front: 2460 mm | Tread, rear: 2440 mm | Tilt of mast/fork carriage forward/backward: 6/10° | Lift: 4000 mm | Fork dimensions: 2440×300×110 mm | Distance between fork-arms: 1000/3000 mm | Gradeability, laden/unladen: 20%
  • 4750 mm
  • mast lowered: 4200 mm | mast extended: 6200 mm | of cabin: 3550 mm
  • 9330 mm
  • to face of forks: 6890 mm
  • 3420 mm
  • laden, below mast: 300 mm | centre of wheelbase:450 mm
  • 6600 mm
  • Min.right angle aisle: 7761 mm
  • 30000 kg
  • 42000 kg
  • Operator type: Seated