2021 HANGCHA Heavy IC Forklift Truck 80,000-105,000lbs CPCD380-W61

Information

2021 HANGCHA Heavy IC Forklift Truck 80,000-105,000lbs CPCD380-W61

DANA TE30 new type gear box, CUMMINS QSM11 3A emission engine and KESSLER D102 heavy-load driving axle are utilized. The key parts are internationally well-known brand products of which the quality is stable and durable. Equipped with seat operating presence sensing (OPS) system to improve safety; The controller area network (CAN) bus LCD display is applicable, which has the function of built-in weight display, fault diagnosis and chinese-english display query system.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 80,000-105,000lbs CPCD380-W61
  • DANA TE-30
  • Diesel
  • Available
  • Fork-carriage: 3500 mm | Aisle width with load length 2400mm: 12340 mm
  • mast lowered: 4600 mm | mast extended: 6570 mm | of overhead cabin: 3920 mm | Seat height relating to SIP: 2840 mm | Coupling: 860 mm

Specifications

  • 2021
  • HANGCHA
  • Heavy IC Forklift Truck 80,000-105,000lbs
  • CPCD380-W61
  • General
  • CPCD380-W61 / CUMMINS/QSM11-CT3
  • 250 kW
  • Diesel
  • 2100
  • 6
  • 10800 cm
  • 1674/1400 N·m/r/min
  • DANA TE-30
  • FWD/RVS 5/3
  • Pneumatic 4×/2
  • 18.00-25-40PR
  • 18.00-25-40PR
  • Hydraulic control, wet multiplate type
  • Electromagnetic hydraulic control, clamp type
  • 24 V | 2×12/120 V/Ah
  • Travel speed, laden/unladen: 24/28 km/h | Lift speed, laden/unladen: 0.31/0.36 m/s | Lowering speed, laden/unladen: 0.43/0.42 m/s
  • Drawbar pull, laden/unladen: 370000 N
  • 255 bar
  • 48 dB
  • Load centre distance: 1200 mm | Load distance, centre of drive axle to fork: 1300 mm | Tread, front: 3050 mm | Tread, rear: 2750 mm | Tilt of mast/fork carriage forward/backward: 6/10° | Free lift: 130 mm | Lift: 4000 mm | Fork dimensions: 130×300×2440 mm | Distance between fork-arms: 1050/3000 mm | Minimum pivoting point distance: 3040 mm | Gradeability, laden/unladen: 25%
  • 5500 mm
  • mast lowered: 4600 mm | mast extended: 6570 mm | of overhead cabin: 3920 mm | Seat height relating to SIP: 2840 mm | Coupling: 860 mm
  • 10360 mm
  • to face of forks: 7920 mm
  • 4215/3180 mm
  • Fork-carriage: 3500 mm | Aisle width with load length 2400mm: 12340 mm
  • laden, below mast: 320 mm | centre of wheelbase: 370 mm
  • 7600 mm
  • 38000 kg
  • 500 l/min
  • 650 liter
  • 650 liter
  • 55000 kg
  • Operator type: Seated