2021 HANGCHA XF Series 3,000-7,000 LBS FD30

Information

2021 HANGCHA XF Series 3,000-7,000 LBS FD30

In the XF Series, Hangcha brought together the experience of more than 30 years building forklifts and the latest forklift technologies, the result is superior in efficiency, environmental friendliness, comfortable operation, reliability, safety. The XF Series, produced from careful research and development, represent a true solution to needs from environment, operator and owner.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • XF Series 3,000-7,000 LBS FD30
  • HANGCHA Powershift
  • Diesel
  • Available
  • Min. right angle stacking aisle: 111.6 in
  • mast lowered: 80.7 in | mast extended: 163.2 in | of overhead guard: 84.6 in

Specifications

  • 2021
  • HANGCHA
  • XF Series 3,000-7,000 LBS
  • FD30
  • Pneumatic
  • CPCD30-XW97F / KUBOTA V2607-CR-E5B
  • EPA/CARB Tier4 F
  • 50.2 hp
  • Diesel
  • 2400 r/min
  • 4
  • 160 in3
  • 171.5/1500 N·m/r/min
  • 3.4 in
  • 4.3 in
  • HANGCHA Powershift
  • FWD/RVS: 1/1
  • 28×9-15-14PR
  • 6.50-10-10PR
  • Battery voltage/nominal capacity: 12/90 V/Ah
  • Travel speed, laden/unladen: 11.5 mph | Lift speed, laden/unladen: 98 ft/min | Lowering speed, laden/unladen: 98 ft/min
  • Drawbar pull, laden/unladen: 4613 lbf
  • 175 bar
  • Load centre distance: 24 in | Load distance, centre of drive axle to fork: 18.9 in | Rear overhang: 21.7 in | Tread, front: 39.6 in | Tread, rear: 38.4 in | Tilt of mast/fork carriage forward/backward: 6/12 ° | Free lift: 5.7 in | Lift: 118.1 in | Fork dimensions: 1.8×4.8×42 in | Gradeability, laden/unladen: 20 %
  • 66.9 in
  • mast lowered: 80.7 in | mast extended: 163.2 in | of overhead guard: 84.6 in
  • to face of forks: 107.5 in
  • 48.2 in
  • laden, below mast: 5.1 in | centre of wheelbase: 6.5 in
  • 92.7 in
  • Min. right angle stacking aisle: 111.6 in
  • 6000 lb
  • loading, laden: 14190 lb | loading, unladen: 3850 lb
  • loading, laden: 1980 lb | loading, unladen: 5720 lb
  • 10.6 gal
  • 9570 lb