2021 HANGCHA XF Series 3,000-7,000 LBS FP18

Information

2021 HANGCHA XF Series 3,000-7,000 LBS FP18

In the XF Series, Hangcha brought together the experience of more than 30 years building forklifts and the latest forklift technologies, the result is superior in efficiency, environmental friendliness, comfortable operation, reliability, safety. The XF Series, produced from careful research and development, represent a true solution to needs from environment, operator and owner.

Photos

Highlights

  • Flesherton, Ontario
  • 2021
  • HANGCHA
  • XF Series 3,000-7,000 LBS FP18
  • HANGCHA Powershift
  • LPG
  • Available
  • Min. right angle stacking aisle: 95.3 in
  • mast lowered: 78.5 in | mast extended: 155.7 in | of overhead guard: 83.7 in

Specifications

  • 2021
  • HANGCHA
  • XF Series 3,000-7,000 LBS
  • FP18
  • Pneumatic
  • CPYD18-XW81F / GCT/GK21LPG CERT
  • EPA/CARB Tier 2
  • 54 hp
  • LPG
  • 2700 r/min
  • 4
  • 126 in3
  • 150/2000 N·m/r/min
  • 3.5 in
  • 3.3 in
  • HANGCHA Powershift
  • FWD/RVS: 1/1
  • 6.50-10-10PR
  • 5.00-8-10PR
  • Battery voltage/nominal capacity: 12/60 V/Ah
  • Travel speed, laden/unladen: 12.4 mph | Lift speed, laden/unladen: 104.4 ft/min | Lowering speed, laden/unladen:
  • Drawbar pull, laden/unladen: 4271 lbf
  • 145 bar
  • Load centre distance: 24 in | Load distance, centre of drive axle to fork: 16 in | Rear overhang: 16.9 in | Tread, front: 35.4 in | Tread, rear: 36.2 in | Tilt of mast/fork carriage forward/backward: 6/12 ° | Free lift: 6.1 in | Lift: 118.1 in | Fork dimensions: 1.4×3.9×36.2 in | Gradeability, laden/unladen: 37 %
  • 58 in
  • mast lowered: 78.5 in | mast extended: 155.7 in | of overhead guard: 83.7 in
  • to face of forks: 90.9 in
  • 42.5 in
  • laden, below mast: 4.5 in | centre of wheelbase: 5.5 in
  • 79.3 in
  • Min. right angle stacking aisle: 95.3 in
  • 3000 lb
  • loading, laden: 8789 lb | loading, unladen: 2695 lb
  • loading, laden: 1144 lb | loading, unladen: 3388 lb
  • 7.4 gal
  • 5874 lb