2021 HANGCHA 3-Wheel Li-ion Battery Forklift 3,200-4,000lbs FBT18Li
- Year 2021
- Make HANGCHA
- Model 3-Wheel Li-ion Battery Forklift 3,200-4,000lbs
2021 HANGCHA 3-Wheel Li-ion Battery Forklift 3,200-4,000lbs FBT18Li
2021 HANGCHA 3-Wheel Li-ion Battery Forklift 3,200-4,000lbs FBT18Li
The newest generation A series 3200-4000lbs 3-pivot electric counterbalance truck is new product of HANGCHA. The totally new designed outline, safety, comfortability and reliability are fully improved, and the whole truck’s performance is also improved.
Features may include:
- High efficiency AC driving motor
- Multi-functions instrument
- Front dual driving motors
- Rubber floor mat
- Solid tyre
- Emergency disconnect switch
- 2-valve inside chassis
- LED headlight
- Rear combination LED light
- Panoramic rearview mirror (in the middle position of the overhead guard)
- 118.1 inch duplex wide view mast
- Adjustable steering column
- Full electronic controlled travelling, lifting and steering
- Horn and reversing buzzer
- CAN-BUS system
- Low noise gear pump (Brand: Shimadzu, Made in Japan)
- Full hydraulic steering
- Soft landing system
Engine
Engine Manufacturer
CPDS18-AD6-I
Motor
Motor Power
Drive motor rating S2 60 min: 4.75 Kw x2 AC | Lift motor rating at S3 15%: 9.5 AC
Fuel System
Fuel Type
Drive: electric (battery or mains), diesel, petrol, fuel gas
Drivetrain
Drive Control
Type: MOSFET/AC
Brakes
Brake System Type
Service: Hydraulic
Parking Brake
Mechanical
Wheels & Tires
Tires, Front Specification
18x7 - 8
Tires, Rear Specification
15x4.5 - 8
Wheels
2x/2
Battery
Battery
voltage, Std: 51.52 V /500 Ah
Operational
Operating Speed
Travel speed, laden/unladen: 9.9/9.9 mph | Lift speed, laden/unladen: 72.8/88.6 fpm | Lowering speed, laden/unladen: 90.6/82.7 fpm
Operating Conditions
Drawbar pull, laden/unladen: 719/854 ibf | Max. Drawbar pull, laden/unladen: 2585/2563 ibf
Performance
Noise Level
Sound level at the driver´s ear according to EN / DIN 12 053: 73 dB (A)
Hydraulics
Maximum Pressure
Operating pressure for attachments: 150 bar
Dimensions
Wheelbase
53.5 in
Height
Mast Lowered: 78.5 in | Mast Extended: 155.3 in | Of Overhead Guard STD: 80.3 in | Seat: 39.4 in | Coupling: 19.7 in
Dimensions
Load centre distance: 24 in | Load distance, centre of drive axle to fork: 14.2 in | Tread, Front: 35.8 in | Tread, Rear: 6.9 in | Tilt of mast/fork carriage forward/backward: 6/6° | Free lift: 5.7 in | Lift: 118.1 in | Fork: 1.4/3.9/36.22 in | Distance Between Fork-Arms: 9.4/39.3 in | Gradeability, laden/unladen: 15/17 % | Towing coupling, type DIN: 24 Pin
Overall Length
111.1 in
Overall Width
42.8 in
Ground Clearance
Laden, Below Mast: 3.9 in | Centre Of Wheelbase: 4.3 in
Width
Fork-Carriage: 39.4 in | Aisle For Pallets 39” x 47” Crossways: 127.4 in | Aisle For Pallets 31.5” x 47.2” Lengthways: 132.3 in
Length
To Face Of Forks: 74.7 in
Turning Radius
61.2 | Internal: 28.7 in
Capacities
Load Capacity, Land
Rated: 3500 lb
Axle Capacity, Front
Loading Laden: 9598/1522 lb | Loading Unladen: 3177/4148 lb
Axle Capacity, Rear
Loading Laden: 9598/1522 lb | Loading Unladen: 3177/4148 lb
Volume
Oil volume for attachments: 35 l/min
Hydraulic Capacity
Tank - capacity (drain & refill): 6.87 gal
Weights
Weight
Service: 7149 lb | Min. battery weight: 1876 lb | Max. battery: 2207 lb
Features
Features
Operator type: hand, pedestrian, standing, seated, order-picker | Tires: solid rubber, superelastic, pneumatic, polyurethane