2021 HANGCHA Heavy Duty Walkie Pallet Jack WP20
- Year 2021
- Make HANGCHA
- Model Heavy Duty Walkie Pallet Jack
2021 HANGCHA Heavy Duty Walkie Pallet Jack WP20
2021 HANGCHA Heavy Duty Walkie Pallet Jack WP20
A series walking pallet truck is newly developed logistics handling equipment developed by Hangcha for the North American market. The AC drive control technology provides advanced performance, comfortable operation, safe and reliable, low maintenance costs. It can be use for loading and unloading in warehouses, supermarkets and workshops.
Features may include:
- 24 volt electrical system
- CAN BUS communication
- Curtis AC Controller
- 7.8” Battery Compartment
- PU drive tire
- Maintenance-Free battery 150Ah
- Built-in charger
- SB-175 battery connector (red)
- Battery disconnect handle
- Key switch
- Multi-function meter
- Electric horn
- Upright-tiller creep speed running
- PU load wheel
- Single load wheel
- Balance leg
Engine
Engine Manufacturer
CBD20-AMC1
Motor
Motor Power
Drive motor rating S2 60 min: 2 HP (1.5 kw) | Lift motor rating at S3 15%: 3 HP (125 kw)
Fuel System
Fuel Type
Drive: electric (battery or mains), diesel, petrol, fuel gas
Drivetrain
Drive Control
INMOTION
Brakes
Brake System Type
Service: Hydraulic
Parking Brake
Mechanical
Wheels & Tires
Tires, Front Specification
09×3/0230×75
Tires, Rear Specification
3.50-5
Wheels
2x/2
Battery
Battery
voltage, Std: 24 V /125 Ah
Operational
Operating Speed
Travel speed, laden/unladen: 5.6/6.2 mph (9/10 km/h) | Lift speed, laden/unladen: 41.3/63 fpm (210/320 mm/s) | Lowering speed, laden/unladen: 80.7 fpm (410 mm/s)
Operating Conditions
Max. Drawbar pull, laden/unladen: 765/810 lbf (3400/3600 N)
Performance
Noise Level
Sound pressure level at the driver’s seat3: 69 dB (A)
Hydraulics
Maximum Pressure
Operating pressure for attachments: 150 bar
Dimensions
Wheelbase
16.5”: 57.79 in (1469 mm) | 18.5”: 59.79 in (1519 mm)
Height
Lowered: 3.1 in | Mast Extended: 155.3 in | Of Overhead Guard STD: 80.3 in | Seat: 39.4 in | Coupling: 19.7 in
Dimensions
Load centre distance: 24 in | Load distance, centre of drive axle to fork: 37.8 in | Tread, Front: 17 in | Tread, Rear: 15.7 in (350 mm) | Tilt of mast/fork carriage forward/backward: 5/10° | Free lift: 5.7 in | Lift: 4.7 in | Fork: 1.4/3.9/36.22 in | Distance Between Fork-Arms: 7.9/39.3 in | Max. Gradeability, laden/unladen: 12/13 % | Towing coupling, type DIN: 24 Pin
Overall Length
110.9 in
Overall Width
42.8 in
Ground Clearance
Laden, Below Mast: 3.9 in | Centre Of Wheelbase: 4.3 in
Width
Fork-Carriage: 39.4 in | Aisle For Pallets 39” x 47” Crossways: 127.4 in | Aisle For Pallets 31.5” x 47.2” Lengthways: 132.3 in
Length
To Face Of Forks: 16.5”: 57 in (1450 mm) | To Face Of Forks: 18.5”: 59.79 in (1519 mm)
Turning Radius
61.2 | Internal: 26.8 in
Capacities
Load Capacity, Land
Rated: 4000 lb
Axle Capacity, Front
Loading Laden: 9047/1368 lb | Loading Unladen: 3177/3707 lb
Axle Capacity, Rear
Loading Laden: 9047/1368 lb | Loading Unladen: 3177/3707 lb
Volume
Oil volume for attachments: 35 l/min
Hydraulic Capacity
Tank - capacity (drain & refill): 6.87 gal
Weights
Weight
Service: 2885 lb (1310 kg) | Battery. 110 lb (50 kg)
Features
Features
Operator type: hand, pedestrian, standing, seated, order-picker | Tires: solid rubber, superelastic, pneumatic, polyurethane