Current HANGCHA Internal-Combustion-Pneumatic-Tire XF Series 3,000-7,000 LBS

2021 HANGCHA XF Series 3,000-7,000 LBS FD25

2021 HANGCHA XF Series 3,000-7,000 LBS FD25

Swipe to View More

  • Year 2021
  • Make HANGCHA
  • Model XF Series 3,000-7,000 LBS
Shop HANGCHA Pre-Owned
Product Details Specifications Photos
2021 HANGCHA XF Series 3,000-7,000 LBS FD25

2021 HANGCHA XF Series 3,000-7,000 LBS FD25

  • Year 2021
  • Manufacturer HANGCHA
  • Model Name XF Series 3,000-7,000 LBS
  • Trim Name FD25
  • Generic Type (Primary) Pneumatic
  • Engine Manufacturer CPCD25-XW97F / KUBOTA V2607-CR-E5B
  • Emissions EPA/CARB Tier4 F
  • Engine Power 50.2 hp
  • Fuel Type Diesel
  • Rated Engine Speed 2400 r/min
  • Cylinder Liners 4
  • Displacement 160 in3
  • Engine Torque 171.5/1500 N·m/r/min
  • Bore 3.4 in
  • Stroke 4.3 in

2021 HANGCHA XF Series 3,000-7,000 LBS FD25

In the XF Series, Hangcha brought together the experience of more than 30 years building forklifts and the latest forklift technologies, the result is superior in efficiency, environmental friendliness, comfortable operation, reliability, safety. The XF Series, produced from careful research and development, represent a true solution to needs from environment, operator and owner.

Engine

Engine Manufacturer CPCD25-XW97F / KUBOTA V2607-CR-E5B
Emissions EPA/CARB Tier4 F
Engine Power 50.2 hp
Fuel Type Diesel
Rated Engine Speed 2400 r/min
Cylinder Liners 4
Displacement 160 in3
Engine Torque 171.5/1500 N·m/r/min
Bore 3.4 in
Stroke 4.3 in

Drivetrain

Transmission HANGCHA Powershift
Stages FWD/RVS: 1/1

Wheels & Tires

Tires, Front Specification 7.00-12-12PR
Tires, Rear Specification 6.00-9-10PR

Battery

Battery Battery voltage/nominal capacity: 12/90 V/Ah

Operational

Operating Speed Travel speed, laden/unladen: 11.5 mph | Lift speed, laden/unladen: 118 ft/min | Lowering speed, laden/unladen: 98 ft/min
Operating Conditions Drawbar pull, laden/unladen: 4388 lbf
Maximum Pressure 175 bar

Dimensions

Dimensions Load centre distance: 24 in | Load distance, centre of drive axle to fork: 18.3 in | Rear overhang: 19.3 in | Tread, front: 38.0 in | Tread, rear: 38.3 in | Tilt of mast/fork carriage forward/backward: 6/12 ° | Free lift: 5.5 in | Lift: 118.1 in | Fork dimensions: 1.6×4.8×42 in | Gradeability, laden/unladen: 23 %
Wheelbase 65.0 in
Height mast lowered: 80.1 in | mast extended: 159.3 in | of overhead guard: 84.1 in
Length to face of forks: 102.6 in
Overall Width 45.5 in
Ground Clearance laden, below mast: 4.5 in | centre of wheelbase: 5.9 in
Turning Radius 88.4 in
Width Min. right angle stacking aisle: 106.7 in

Capacities

Load Capacity, Land 5000 lb
Axle Capacity, Front loading, laden: 12045 lb | loading, unladen: 3432 lb
Axle Capacity, Rear loading, laden: 1738 lb | loading, unladen: 4851 lb
Fuel Capacity 10.6 gal

Weights

Weight 8283 lb

Product Photography